Centre d'assistance

Température et humidité - Thermomètres

Tous les produits (78) Affichage grille Affichage grille Affichage liste Affichage liste

FLIR TG54-2

Thermomètre IR Spot 20:1

Le FLIR TG54-2 fournit des relevés de température sans contact afin que vous puissiez prendre des mesures rapidement et sans effort sans compromettre la sécurité. Offrant un rapport distance-point pouvant atteindre 20:1, le TG54-2 peut mesurer des cibles plus petites à une distance plus sécuritaire. Obtenez une précision parfaite grâce à la technologie infrarouge, à la visée laser de classe II et à une température IR maximale de 850 °C (1 562 °F). Pour une performance fiable dans les applications exigeantes, le thermomètre est conçu pour résister à une chute de 3 m (9,8 pi) et est homologué IP65.

FLIR TG56-2

Thermomètre IR Spot 30:1 avec thermocouple de type K

Le FLIR TG56-2 fournit des relevés de température plus sûrs lorsque des relevés de température élevée sont requis. Offrant un rapport distance-point pouvant atteindre 30:1, le TG56-2 peut mesurer des cibles plus petites à une distance plus sécuritaire. La précision parfaite est propulsée par la technologie infrarouge, la visée laser de classe II et une température IR maximale de 1 300 °C (2 372 °F). L’écran d’affichage couleur est conçu pour vous permettre de visualiser facilement simultanément les relevés de température de référence actuels et sélectionnés. Le thermomètre comprend un thermocouple de type K pour les relevés de température avec contact.

FLIR TG56

Thermomètre monopoint IR 30:1 avec thermocouple de type K

La FLIR TG56 effectue des mesures thermiques de surface sans contact, de sorte que vous pouvez rapidement et facilement collecter des mesures dans les lieux hors de portée. Avec un ratio distance/point d'intérêt de 30:1, le TG56 peut mesurer de petites cibles à une distance plus sûre. Le thermomètre vous permet de voir simultanément la mesure actuelle et les deux dernières mesures de température, et l'écran couleur facilite la navigation dans les menus et la sélection des réglages.

FLIR TG54

Thermomètre infrarouge monopoint 24:1

La FLIR TG54 effectue des mesures thermiques de surface sans contact, de sorte que vous pouvez rapidement et facilement collecter des mesures dans les lieux hors de portée. Avec un ratio distance/point d'intérêt de 24:1, le TG54 peut mesurer de petites cibles à une distance plus sûre. Le thermomètre vous permet de voir simultanément la mesure actuelle et les deux dernières mesures de température, et l'écran couleur facilite la navigation dans les menus et la sélection des réglages.

Extech 382400

Flexible True RMS 3000A AC Clamp Meter

The Extech 382400 Flexible True RMS 3000A AC Clamp Meter is a 3000 A AC clamp meter with a flexible, 610 mm (24 in) probe to easily wrap around bus bars and cable bundles. It features an attractive, large LCD displaying AC current, AC voltage, and frequency measurements.

Extech 392050

Thermomètre à cadran à tige de pénétration

L’Extech 392050 est un thermomètre à cadran à tige de pénétration qui a une plage de température de -50°C à 150°C (-58°F à 302°F) et une précision de ± 1°C (2°F). Idéal pour une utilisation dans les liquides, les semi-solides et les solides. Il est doté d’un arbre en acier inoxydable de 12,7 cm (5 po) avec un cadran de 5 cm (2 po), d’un interrupteur marche/arrêt et d’une mise hors tension du suto après une heure. Le multimètre comprend un bouton de batterie de 1,5 V et une gaine de protection en plastique avec pince de poche.

Extech 392052

Flat Surface Stem Dial Thermometer

The Extech 392052 is a Flat Surface Stem Dial Thermometer with a temperature range of -50°C to 300°C ±2°C (-58°F to 572°F ±2°F). Ideal for measuring high temperatures on motors and other flat surfaces. The thermometer features a 12.7 cm (5 in) stainless steel shaft with a 5.1 cm (2 in) dial, an on/off switch, and auto power off function after one hour. Product includes 1.5 V battery button.

Extech 39240

Thermomètre à tige étanche

Le modèle 39240 d’Extech est un thermomètre à tige étanche. Ce thermomètre à tige est de taille poche doté d’un affichage numérique avec une résolution de 0,1° et de l’enregistrement des valeurs min/max. Il mesure la température des solides et des liquides congelés à l’aide de la tige en acier inoxydable de 2,75 po (70 mm). Mesures de température de -40 à 392°°°C. Rappel MAX/MIN des températures élevées et basses et fonctions de conservation des données et d’arrêt automatique. Comprend une pile bouton LR44 et un couvercle de protection.

Extech 39272

Pocket Fold up Thermometer with Adjustable Probe

The Extech 39272 is a Pocket Fold up Thermometer with Adjustable Probe. It includes a 11.4 cm (4.5 in) stainless steel probe that adjusts at detents in 4 positions (45, 90, 135, and 180 Degrees). It measures temperature -50°C to 300°C (-58°F to 572°F) ± 1°C (± 1.8°F). Features data hold, min/max and an auto power off. Comes complete with wrist strap and AAA battery.

Extech 401014

Thermomètre intérieur/extérieur à gros chiffres

Le 401014 est un thermomètre à gros chiffres qui affiche simultanément les températures intérieures et extérieures. Son capteur étanche pour la mesure extérieure s’étend sur un câble mince de 9,6 pi pour une installation facile. La mémoire interne stocke les lectures Min/Max au fil du temps. Le thermomètre comprend un support intégré, un capteur de température externe, une pile AAA et un support mural.

Extech 401014A 

Alerte de température intérieure/extérieure à gros chiffres

Le thermomètre à gros chiffres de Extech affiche simultanément les températures intérieures et extérieures et il est doté d’une alarme haut/bas programmable par l’utilisateur pour la température extérieure (sonde externe). Sa sonde externe câblée à l’épreuve des intempéries avec un câble mince de 3 m (9,6 pi) peut être facilement installée à travers les fenêtres, les portes ou toute petite ouverture menant à l’extérieur ou à l’intérieur d’un réfrigérateur/congélateur ou des zones/pièces à température contrôlée. La mémoire interne stocke les relevés min/max au fil du temps. Le thermomètre comprend un support intégré pour affichage sur table et un support de montage pour affichage mural.

Extech 421502

Thermomètre à entrée double de type J/K avec alarme

Le thermomètre d’entrée de type K/J Extech 421502 est doté d'un double affichage et d’alarmes sonores hautes/basse programmables. Il offre une précision de 0,05 %, des lectures min/max/moyennes, la conservation des données, la fonction relative et la mesure de la température différentielle entre les types J, K ou J et K. Il est livré avec deux sondes de température à cordon de type K, un étui de protection avec support et une batterie de 9 V.

Extech 421509

7 Thermocouple Dual Input Datalogger with Alarm

The Extech 421509 is a 7 Thermocouple Dual Input Datalogger with an Alarm. The built in PC interface with an internal memory stores up to 16 data sets and a maximum of 1024 readings that can be downloaded to your PC for storage and analysis. It accepts seven thermocouple types (K,J,T,E,R,S,N), and it features high/low programmable alarms, min/max/average readings, data hold, relative function, auto power off, and a real time clock with calendar. Comes complete with two Type K bead wire temperature probes, software and cable, protective holster, and a 9 V battery.

Extech 42260

Temperature Datalogger

The Extech 42260 is an additional Temperature Datalogger for use with the 42265 and 42266 kits. This waterproof (IP65) datalogger records up to 8,000 readings and has three start methods (scheduled, immediate or magnetic). The 42260 has a wide operating temperature range from -40°C to 85°C (-40°F to 185°F). Multiple dataloggers can be programmed and data downloaded from a single docking station (requires a docking station for initial programming).

Extech 42265

Temperature Datalogger Kit with PC Interface

The Extech 42265 is a Temperature Datalogger Kit with PC Interface. This waterproof (IP65) datalogging kit records up to 8000 readings with a date and time stamp that can be downloaded to your PC for analysis. Temperature can be viewed on the datalogger's display. Data and additional dataloggers (42260) can be programmed from one docking station. It has a wide operating temperature range from -40°C to 85°C (-40°F to 185°F), as well as a programmable sampling rate from one second to two hours plus hi/lo limits with an alarm indication. Comes complete with docking station, software, and one 42260 datalogger with Li-Ion battery.

Extech 42500

Mini IR Thermometer

The Extech 42500 Mini IR Thermometer provides fast temperature measurements without contact simply by pointing at the object being measured. The built-in laser improves aim by centering the measuring area. Readings are selectable in °C or °F, and the backlit display allows readings in dimly lit areas. The temperature range is -20°C to 260°C (-4°F to 500°F). Applications include checking heating and A/C ducts, motors, bearings, tires, radiators, cooking grills, refrigerators, and much more. Includes 9 V battery.

Extech 42509

Dual Laser IR Thermometer with Color Alert

The Extech 42509 is a Dual Laser IR Thermometer with Color Alert. This meter has dual lasers for quick accuracy in target areas as well as programmable high/low alarms. It measures up to 510°C (950°F). Features an automatic blue backlit dual LCD display and adjustable emissivity which increases measurement accuracy for different surfaces. Complete with case and 9 V battery.

Extech 42510

Mini IR Thermometer

The Extech 42510 is a wide range Mini IR Thermometer. This meter measures non-contact surface temperature from -50°C to 538°C (-58°F to 1000°F). It features audible and visible over range indicators, while also having an 8:1 distance to target ratio with a built-in laser pointer for easy targeting. Complete with 9 V battery and carrying case.

Extech 42510A

Wide Range Mini IR Thermometer

The Extech 42510A Wide Range Mini IR Thermometer measures temperature from -50°C to 650°C (-58°F to 1200°F) with 0.1 degree resolution for readings up to 999.9 degrees. The adjustable high/low set points with audible alarm alerts users when temperatures exceed the programmed set points. It features adjustable emissivity for better accuracy on a variety of surfaces. Its built-in laser pointer can help identify target areas. Built in backlighting illuminates the display for taking measurements at night or in areas with low background light levels. 12:1 distance to target ratio. Comes with data hold, min/max, over range indicator, and auto power off functions. Complete with 9 V battery and pouch case.

Extech 42511

Dual Laser InfraRed Thermometer

The Extech 42511 is a Dual Laser IR Thermometer. It features a meter which indicates ideal measuring distance and a 12:1 distance to target ratio where two laser points converge to a 2.5 cm (1 in) target spot. it displays continuous and held data on a white backlit dual LCD display. Temperature range from -50°C to 600°C (-58°F to 1100°F). Complete with pouch case and 9 V battery. CE certified.

Extech 42512

Dual Laser InfraRed Thermometer

The Extech 42512 is a Dual Laser InfraRed Thermometer. This thermometer features dual lasers for accurate targeting with a fast (0.15 s) response time, and it has a backlit dual LCD display. Temperature range from -50°C to 1000°C (-58°F to 1832°F). Complete with pouch case and 9 V battery.

Extech 42515

InfraRed Thermometer with Type K Input

The Extech 42515 is a wide range InfraRed Thermometer with a Type K Input which measures both non-contact and contact temperature. It features a wide InfraRed temperature range from -50°C to 800°C (-58°F to 1472°F). Stores up to 20 readings. 13:1 distance to target ratio, laser pointer for easy targeting. Type K input for surface temperature measurements from -50°C to 1370°C (-58°F to 2498°F). Complete with a 9 Volt battery, Type K bead wire probe, and a case.

Extech 42515-T

Wide Range IR Thermometer with Type K input and Pipe Clamp

The Extech 42515-T Wide Range IR Thermometer measures surface temperature from -50°C to 800°C (-58°F to 1472°F) without contact. Simply point the laser at target and shoot. A backlit LCD illuminates display for use at night or in areas with low lighting conditions. Includes a TP200 Type K Pipe Clamp Temperature Probe (-20°C to 93°C / -4°F to 200°F) with a spring-loaded jaw for secure grip on pipes from 6.35 mm (0.25 in) to 38 mm (1.5 in) in diameter. Comes complete with 9 V battery, Type K bead temperature probe, pipe clamp probe, and case.

Extech 42529

Wide Range IR Thermometer

The Extech 42529 Wide Range IR Thermometer with laser pointer measures non-contact surface temperature up to 320°C (600°F). It features a 6:1 distance to target ratio, fixed emissivity (0.95) that covers 90% of surface applications, audible and visual overrange indicators, and automatic data hold after the trigger is released. Comes complete with a 9 V battery and carrying case.